Killing Mold Will Not Solve Your Problem!
Killing Mold Will Not Solve Your Problem Because Dead Spores Are Harmful!
One of the problems with the mold remediation industry is the lack of regulation. Because of this, there are many contractors that believe they can offer mold removal services without the proper training or experience.
This is particularly true when you encounter mold removal contractors that recommend that mold can be simply killed. The problem with this approach is that it is not a permanent solution to a mold problem. In short, there is no “quick fix” for mold contamination situations. As a consumer, you need to be cautious about hiring contractors that offer magical solutions that involve just spraying a chemical to kill the mold dead.
As stated by Michael Pinto, CEO of Wonder Makers Environmental:
“Killing mold, but leaving the residue in place, is not acceptable. Since many health impacts can be triggered by exposure to both live and dead mold spores, the source and secondary contamination must be removed.” (MOLD INDOORS: Killing it is Not Enough)
Valor Mold has been serving the Washington DC area since 2006.
We are mold removal experts and would never recommend or use bleach to try to kill mold because we know it does not work. Yes, you will find many sites on the internet that recommend the use of bleach to kill mold. The problem with this advice, however, is that dead mold spores can also cause health issues.
The purpose of this article is to briefly explain why mold grows and explain in detail why bleach is not a viable solution.
Mold Facts You Should Be Aware Of!
- Mold thrives when moisture is present. Removing mold without addressing the cause of the problem, ie. identifying the moisture source is not a long term solution. Before any mold removal, the moisture problem must first be found and fixed.
- Exposure to mold spores, both live and dead, and their byproducts like microbial volatile organic compounds (MVOCs), mycotoxins, connecting filaments, etc. can cause illnesses ranging from minor allergic reactions, respiratory problems like asthma and sinusitis, to more serious, life threatening illnesses.
- With respect to health, every individual responds to mold differently. Some people get sick, others don’t. A little bit of mold can make some residents of a property sick, but will not have an impact on others. Research has shown that 25% of the population have a genetic predisposition to mold illness and the condition known as Chronic Inflammatory Response Syndrome (CIRS).
- Mold is a biological agent that will continue to grow as long as the right conditions exist. This is the reason that mold is such a concern because it will continue to thrive and grow unless it is removed and the underlying moisture cause is fixed. In short, ignoring a mold problem will make the situation worse and pose more dangers.
- Contractors trained in mold removal, refer to the process as “remediation” because they have invested in specialized training and equipment and take precautions to prevent the spread of the mold in other parts of the building. Mold remediation specialists will never recommend a “quick fix” because they understand that relying on mold sprays, bleach, biocides, and fungicides are an ineffective “short cut” to mold removal.
The Bleach Myth!
“Perhaps the most misunderstood aspect of bleach when proposed as a cleaner or sanitizing agent is that its effectiveness is greatly reduced in the presence of organic material. To be a successful sanitizer, bleach must be used on clean materials and surfaces. This is why bleach products are used in the laundry after the wash cycle or in a commercial kitchen as a component in the third sink after the dishes have been washed and rinsed. The efficacy of bleach as a sanitizer is also compromised by heat and light. Despite the fact that the chlorine odor may linger for some time after use, bleach loses strength so quickly that it is not considered to have a residual effect that would prevent future bacterial or fungal growth.” (Michael Pinto, Why Restoration Professionals Should Avoid Using Bleach)
The Internet is a great source of information, but unfortunately there are still websites that recommend bleach. Main stream online publications like the Huffington Post and even the CDC recommend that bleach can be used to kill mold.
Fortunately, the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA) no longer recommend the use of bleach because using chlorine bleach to kill mold is one of the worst things you can do.
Bleach only works to remove mold on hard, impermeable surfaces like bathtub and shower surrounds or tiles. However, on porous and semi-porous surfaces bleach is not effective. For instance, on porous surfaces like drywall or hardwood floors, it won’t work to kill mold or keep it from coming back because mold spreads its roots, called mycelia and hyphae, deep into porous surfaces. Simply spraying a bleach solution on the surface won’t kill mold spores at their roots.
“If you spray bleach all over your “black toxic mold” you won’t kill every single spore….To kill every single mold spore using bleach, for example, you’d have to use such a high concentration of disinfectant and you’d have to keep it on the surface for so long that more likely you’d damage the structure – and still miss some toxic spores.” (How to Kill Mold – Do We Want to? Is Dead Mold Dangerous?)
Top Reasons We Do Not Recommend Bleach For Mold Removal!
Bleach Does Not Address The Cause Of The Mold Problem!
Experienced mold removal specialists understand that the most effective way to deal with mold is to first find the moisture source and make sure it is fixed.
The next step is to remove the mold contaminated porous materials.
Proper removal of mold contaminated materials like drywall, carpet, soft goods, insulation, and other porous materials is essential because mold has hyphae, which are basically roots that embed themselves in the material.
Bleach only removes the color from mold. After you spray bleach, only the surface appears clean. But the problem is, the mold’s roots, or hyphae, continue to grow. This is the reason that bleach does not work. Bleach may kill some of the surface mold, but it will not be able to penetrate and kill the roots.
In fact, bleach encourages toxic mold growth on porous surfaces because it provides excess moisture. Bleach contains about 90% water. Spraying this is counter-productive because water is an essential ingredient mold needs to grow. When you apply bleach to a surface, the chlorine quickly evaporates leaving behind a lot of water. Then, when the water soaks into porous surfaces like wood, it encourages mold growth. So, bleach can actually make your mold problem worse.
Keep in mind, even if another biocide or fungicide is sprayed on the material, killing the roots, the material will still be contaminated with dead spores. The best course of action to permanently deal with a mold problem on porous materials is to properly dispose of the contaminated material.
Bleach Is Dangerous!
When you are using bleach you should always wear gloves, goggles, and a respirator for three key reasons.
- Bleach is a corrosive that could irritate and damage your skin.
- During the spraying and evaporation process, bleach releases chlorine gas that will impact the eyes and respiratory system.
- One of the by-products of chlorine bleach are dioxins, linked to cancer.
Chlorine bleach is also extremely harmful to surfaces. For example, when you use bleach on wood, it starts to weaken it by breaking the fibers. When you spray bleach on metal, it starts to corrode it almost immediately. Thus, using bleach to kill mold creates problems with the structural integrity of a home.
If you intend to use bleach for household cleaning projects, never mix it with other cleaning solutions or detergents that contain ammonia because toxic fumes will be produced.
As stated by Michael Pinto:
“Depending on the ratio of bleach to ammonia, chlorine gas, nitrogen trichloride and/or hydrazine will be produced when these two are mixed. In addition to being toxic, the last two listed by-products from this bleach mixture are also explosive. Other reactive by-products that can come from bleach mixtures are toxic chloramines and dioxins.” (Michael Pinto, Why Restoration Professionals Should Avoid Using Bleach)
The core ingredient of bleach is chlorine. Over time, chlorine can evaporate and escape through the plastic container. In short, the longer bleach sits, the more ineffective it will become because the chlorine dissipates.
In addition, bleach doesn’t work as a sanitizing agent when it’s mixed with organic material. To be a successful sanitizer, bleach has to be used on clean materials and surfaces. That’s why bleach products get used in the laundry after the wash cycle. Light and heat compromise the sanitizing properties of bleach. Despite the fact that the chlorine odor lingers for a while after you use it, bleach loses strength so quickly it doesn’t have a residual effect. That is, it doesn’t prevent future bacterial or fungal growth.
Many Inexperienced or Untrained Mold Removal Contractors Do Not Understand Why Bleach Does Not Kill Mold!
Valor Mold specializes in mold. We are mold removal experts and do not cut corners because we understand why mold grows and how to prevent mold from growing back. Because of our training and knowledge, we understand why bleach is not a viable mold removal or prevention solution.
You might think that all mold removal contractors understand why bleach is not effective. However, this is not the case, adding further to consumer confusion.
Because of the lack of regulation in the mold remediation industry, some contractors still believe that killing mold is valid. These contractors are poorly trained, do not understand mold and do not follow the IICRC S520 standards for mold remediation
There is no “magical fix” for mold contamination situations. As a consumer, you need to be cautious about hiring contractors that recommend spraying a chemical to try to kill the mold dead. The price of the service may be very appealing, but if it sounds too good to be true, it is.
If a mold removal contractor claims that they can get rid of all the mold in your home simply by spraying or fogging the area, you should not hire this contractor and do further due diligence and research.
In the words of Christa Upton, a mold survivor whose health suffered after she tried to kill mold with bleach:
Don’t “kill” or spray mold! Instead, properly remediate it and hire a professional with experience and references that knows what they are doing…. We “killed” mold, sprayed with Lysol, bleached sub-floor and ran fans, replaced carpet but left mold in the sub-floor, walls, etc. Eight months later I was so sick I could not get out of bed….Not one spray has been shown to denature these toxins. Some sprays appear to make toxins worse or more airborne. Humans cannot smell most mold toxins, especially after the mold is “dead.” They are so small that they cannot be seen. They are so tiny that they generally cannot be removed with air purifiers or filters. But they are deadly.
As this quote demonstrates, when you find mold, the initial reaction is to try to kill it with disinfecting sprays and bleach. This attempt at killing mold is not a long term solution and can in fact make you sick!
“Even if in theory we could “kill” every spore, the assumption that they are unimportant is highly questionable. “Dead” spores often contain allergens or toxins that are just as harmful to someone breathing them or getting such mold in one’s eye or in a cut, as before….The object is not to “kill” mold, it is – to remove the mold reservoir in the building by physical cleaning or in cases of items that can’t be cleaned, such as drywall, soft goods, carpets, furniture, or insulation, remove the moldy material – to identify the cause and make sure that’s been corrected.” (How to Kill Mold – Do We Want to? Is Dead Mold Dangerous?)
Got Mold Questions?
If you think you have mold, please do not reach for the bottle of bleach, give us a call, 703-897-7121 or send us an e-mail. We look forward to serving you! 🙂
Killing #Mold Will Not Solve Your Problem! https://t.co/vctZVswUC7 PLEASE RETWEET pic.twitter.com/HKZhZwFtbg
— Valor Mold (@ValorMold) March 20, 2018