Home > Service Areas > Alexandria > Soda Blasting

Rid Your Attic, Crawl Space, Or Basement
Of Mold With Soda Blasting
In Alexandria, VA

Soda Blasting Is The Proven Method Of Removing Mold In
Hard-To-Reach Places Traditional Methods Can’t Touch

There’s a right way and a wrong way to rid your Alexandria, VA, home’s attic, crawl space, or basement of mold. Traditional methods involve wire brushing and sanding, but these methods can take a significantly long time when the mold is widespread. Not to mention, they can’t get into all the nooks and crannies. 

At Valor Mold, we provide soda blasting services for these situations. This method is the most efficient and cost-effective solution to widespread mold in any of these areas of your home. It offers the following benefits:

  • Removal of 99.6% of mold
  • Costs only 25% of sanding fees
  • Is 80% more efficient than sanding
  • Restores wood to like-new appearances


While soda blasting may be a messy endeavor, we choose it for its safety and efficacy. We also have no problem cleaning up behind ourselves. Knowing that we’re ridding your home of mold without putting you or your family at risk with dangerous practices is enough for us to keep doing what we’re doing.

We Don’t Use Chemicals To Remove Mold

Despite the common myth that you need to bleach mold until it’s dead, you don’t technically need any chemicals during mold remediation. In fact, some chemicals can make the situation worse.

We follow the national mold remediation standard with four clear steps outlined for the proper removal of mold:

  1. Contain and place the affected area under negative pressure.
  2. Tear out all moldy materials and objects that cannot be salvaged.
  3. Strip the mold out of all materials and objects that can be salvaged.
  4. Remove all residual mold spores.

What it comes down to is good old-fashioned elbow grease. There’s no magic chemical that makes the mold vanish into nothing.

We’re Always Open And Honest About Mold Issues

The average homeowner in Northern VA, Southern MD & Washington DC is not a mold expert. They generally never think about it until it’s a problem. Unfortunately, many mold remediation companies know this and prey on their lack of knowledge. They’ll exaggerate the problem, upsell unnecessary services, and overcharge for lackluster work.

Finding a reliable, trustworthy mold remediation company that does a good job is challenging. That’s why we’ve made it a point to be different. We practice open-book honesty in every interaction with every customer.

When we assess your mold problem, we’ll tell you exactly what it is with straight facts. While it may not be what you want to hear, it will be all the information you need to correctly handle the issue. We’ll also tell you plainly if you don’t have a mold problem and don’t need our services.

We’ll never try to sell you something you don’t need, like costly chemical treatments that don’t do any good. Our prices for mold testing and mold remediation are posted on our website because we want you to have all the facts upfront. We also recommend you have a third-party company test behind us to verify our work so there’s no conflict of interest.

With Mold, Cleaning Is Essential – So We Do It Well

The scouring and scrubbing during mold removal isn’t the most crucial step – it’s the cleaning afterward. Many mold remediators skip this step, but the problem can come right back if it’s not done correctly. During the deep cleaning, millions of mold spores are kicked up.

These cause the allergic and immune reactions, not the mold you see growing on surfaces within your Alexandria, VA, home. We’ll take 5 to 10 times longer than the competition to clean the mold from your affected areas because we detail clean.

We use a three-step process to remove as much mold as possible:

  1. Industrial-Strength HEPA Vacuuming: We use a special vacuum designed specifically to target mold spores. You can’t buy this equipment at a store. We systematically go over every square inch of the containment area to remove the airborne mold spores.
  2. Damp Wiping: Mycotoxins are sticky and remain on the surfaces of the containment area following vacuuming. So, we use a 70/30 isopropyl alcohol and water mixture with a dash of dish soap to wipe down every surface. 
  3. Another Round: We’ll complete one more round of HEPA vacuuming or damp wiping depending on the specific needs of your containment area.

Trust Valor Mold To Eliminate The Mold From Your Attic,
Crawl Space, Or Basement With Soda
Blasting In Alexandria, VA

If you have a widespread mold problem in your attic, basement, or crawl space, turn to the mold experts in Alexandria, VA. At Valor Mold, we can efficiently and cost-effectively remove your mold with soda blasting.

This process will restore your wood to like-new condition and get into all the hard-to-reach places other options can’t. Every member of our team has one goal in mind – delivering a safe, healthy home for you to live in.

Call Valor Mold today at (703) 897-7121 to schedule a free estimate.

We service Alexandria, VA, and the surrounding areas.

Why Choose Us

We remove mold the right way… and it would be an honor to hear from you.

96% Success Rate

96% Success Rate

Your home is in the best hands—our chemical-free remediation has the highest success rate in the industry.

Instant Mold Testing

Instant Mold Testing

You get the answers you need—our special mold testing provides 99% accurate results on the spot.

300+ Happy Clients

300+ Happy Clients

You can trust our process—we’ve performed over 300 successful projects since we opened in 2006.

Get In Touch

Fill out this form to contact us. We’ll follow up with 24 business hours.